Part of Slepp's Projects — Pastebin — TURL — Imagebin — Filebin
Feedback -- English French German Japanese
Create Upload Newest Tools Donate
Sign In | Create Account

Paste Actions

Download Raw
Embed
pBox URL
Post to Twitter
Trackback (22)
Remove Paste

Paste Details

Raw format, 5 years 10 months old, and 1,652 hits.

Advertising

Mine
Monday, July 2nd, 2007 at 5:27:16pm MDT 

This post has 1 comment thread shown at the end of this page.

  1. *
  2. [CLOC]
  3. [MEMC]
  4. [COPY]
  5. [CODE]
  6. [JRAM]
  7. [DATA]
  8. [ZBSS]
  9. [ITLB]
  10. [CACH]
  11. [USEC]
  12. [DBGI]
  13. [MAIN]
  14.  
  15. MMON V1.4.4-17  [STW4X225-USDTV-Hisense] Jan 11 2005 16:18:52
  16. Copyright (c)2002 ATI Technologies Inc.
  17. Copyright (c)2002-2004 U.S. Digital Television, Inc.
  18.  
  19.  CLOCKS : xtal=24576KHz
  20.           x=166MHz
  21.           mips=264MHz
  22.  FLASH  : #0=Samsung K9F2808U0
  23.           #1=Samsung K9F2808U0
  24.           #2=ST Microelectronics M25P10
  25.  
  26. Loading splash screen:
  27. Reading 1 blocks from flash #0 to 0x83C00000...
  28. .
  29. 1 blocks read.
  30. Uncompressing...
  31. Compressed size is 0x3A85 bytes
  32. Original size is 0x12C000 bytes
  33. Setting display to mode 1
  34. Hardware: db2020
  35.  
  36. ................................................
  37. 48 blocks read.
  38. Uncompressing...
  39. Compressed size is 0xBDCC2 bytes
  40. Original size is 0x1CD000 bytes
  41. 8010046C(root=/dev/mtdblock1, ip=192.168.0.2, usdtvhw=db2020)
  42.  
  43. LINUX started...
  44. ATI Xilleon 225 (little endian), Solo mode
  45. AGP bus speed is 66MHz
  46. Initializing IRQs
  47. HZ=:100
  48. mips_counter_frequency=:132185710
  49. memsize environment variable not set: assuming 32MB
  50. CPU revision is: 00018007
  51. Primary instruction cache 16kb, linesize 16 bytes (4 ways)
  52. Primary data cache 16kb, linesize 16 bytes (4 ways)
  53. Linux version 2.4.18-15-USDTV (jimb@build-x225.fl.usdtv.com) (gcc version 2.96 20000731 (Red Hat L5Xilleon REG value before setting: PAD_USB1: 0xfc3, PAD_USB2: 0xfc3
  54. Xilleon REG value after setting: PAD_USB1: 0xf43, PAD_USB2: 0xf43
  55. Determined physical RAM map:
  56.  memory: 00080000 @ 00000000 (ROM data)
  57.  memory: 00080000 @ 00080000 (reserved)
  58.  memory: 01f00000 @ 00100000 (usable)
  59. On node 0 totalpages: 8192
  60. zone(0): 8192 pages.
  61. zone(1): 0 pages.
  62. zone(2): 0 pages.
  63. Kernel command line: root=/dev/mtdblock1 ip=192.168.0.2 usdtvhw=db2020  console=ttyS0,115200,n,8,1
  64. calculating r4koff... CPU frequency 264.37 MHz
  65. Calibrating delay loop... 263.78 BogoMIPS
  66. MIPS CPU counter frequency is fixed at 132185710 Hz
  67. Memory: 29188k/31744k available (1661k kernel code, 2556k reserved, 87k data, 88k init, 0k highmem)Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
  68. Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
  69. Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
  70. Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
  71. Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
  72. Checking for 'wait' instruction...  unavailable.
  73. POSIX conformance testing by UNIFIX
  74. Autoconfig PCI channel 0x802cc5e8
  75. Scanning bus 00, I/O 0x00002000:0x00010001, Mem 0x10000000:0x18000001
  76. 00:14.0 Class 0480: 1002:4855 (rev 03)
  77.         Mem at 0x08000000 [size=0x4000000]
  78.         I/O at 0x00002000 [size=0x100]
  79.         Mem at 0x10000000 [size=0x8000]
  80.         Mem at 0x1c000000 [size=0x2000000]
  81. 00:14.1 Class 0101: 1002:4856 (rev 02)
  82.         I/O at 0x00002100 [size=0x8]
  83.         I/O at 0x00002108 [size=0x4]
  84.         I/O at 0x00002110 [size=0x8]
  85.         I/O at 0x00002118 [size=0x4]
  86.         I/O at 0x00002120 [size=0x10]
  87. 00:14.2 Class 0c03: 1002:4857 (rev 0b)
  88.         Mem at 0x10008000 [size=0x1000]
  89. 00:14.5 Class 0401: 1002:4858 (rev 02)
  90.         Mem at 0x10009000 [size=0x100]
  91. 00:14.6 Class 0703: 1002:4859 (rev 02)
  92.         Mem at 0x10009100 [size=0x100]
  93. Linux NET4.0 for Linux 2.4
  94. Based upon Swansea University Computer Society NET3.039
  95. Initializing RT netlink socket
  96. Starting kswapd
  97. Disabling the Out Of Memory Killer
  98. JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications AB.
  99. initialize_kbd: Keyboard failed self test
  100. pty: 256 Unix98 ptys configured
  101. Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
  102. Testing ttyS0 (0xbe000010, 0xbe000010)...
  103. Testing ttyS1 (0xbe000000, 0xbe000000)...
  104. ttyS00 at 0xbe000010 (irq = 100) is a 16550A
  105. ttyS01 at 0xbe000000 (irq = 99) is a 16550A
  106. block: 64 slots per queue, batch=16
  107. loop: loaded (max 8 devices)
  108. SCSI subsystem driver Revision: 1.00
  109. request_module[scsi_hostadapter]: Root fs not mounted
  110. STW NAND Flash initializing...
  111. Reading pflash invalid block table 0 at block 0...
  112. Reading pflash invalid block table 1 at block 1...
  113. NAND device: Manufacturer ID: 0xec, Chip ID: 0x73 (Samsung NAND 16MiB 3,3V)
  114. Creating 6 MTD partitions on "NAND 16MiB 3,3V":
  115. 0x00000000-0x00100000 : "MTD NAND partition 0 - boot area"
  116. 0x00100000-0x00e00000 : "MTD NAND partition 1 - root FS A"
  117. 0x00e00000-0x01000000 : "MTD NAND partition 2 - kernel area"
  118. 0x01000000-0x01100000 : "MTD NAND partition 3 - boot area B"
  119. 0x01100000-0x01e00000 : "MTD NAND partition 4 - root FS B"
  120. 0x01e00000-0x02000000 : "MTD NAND partition 5 - kernel area B"
  121. STW NAND Flash devices initialization done.
  122. usb.c: registered new driver hub
  123. usb-ohci-pci.c: USB OHCI at membase 0xb0008000, IRQ 2
  124. usb-ohci-pci.c: usb-00:14.2, PCI device 1002:4857
  125. usb.c: new USB bus registered, assigned bus number 1
  126. hub.c: USB hub found
  127. hub.c: 2 ports detected
  128. usb.c: registered new driver hid
  129. hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
  130. hid-core.c: USB HID support drivers
  131. Initializing USB Mass Storage driver...
  132. usb.c: registered new driver usb-storage
  133. USB Mass Storage support registered.
  134. mice: PS/2 mouse device common for all mice
  135. NET4: Linux TCP/IP 1.0 for NET4.0
  136. IP Protocols: ICMP, UDP, TCP
  137. IP: routing cache hash table of 512 buckets, 4Kbytes
  138. TCP: Hash tables configured (established 2048 bind 2048)
  139. IP-Config: No network devices available.
  140. NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
  141. FAT: bogus logical sector size 381
  142. FAT: bogus logical sector size 381
  143. hub.c: USB new device connect on bus1/1, assigned device number 2
  144. scsi0 : SCSI emulation for USB Mass Storage devices
  145.   Vendor: Generic   Model: USB SD Reader     Rev: 2.00
  146.   Type:   Direct-Access                      ANSI SCSI revision: 02
  147. Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
  148. SCSI device sda: 59776 512-byte hdwr sectors (31 MB)
  149. sda: Write Protect is off
  150. Partition check:
  151.  sda: sda1
  152. Empty flash at 0x006298a0 ends at 0x00629a00
  153. Empty flash at 0x007bd028 ends at 0x007bd200
  154. Empty flash at 0x007bec40 ends at 0x007bee00
  155. VFS: Mounted root (jffs2 filesystem).
  156. Freeing unused kernel memory: 88k freed
  157. Algorithmics/MIPS FPU Emulator v1.5
  158. serial console detected.  Disabling virtual terminals.
  159. init started:  BusyBox v0.60.0 (2002.02.05-18:03+0000) multi-call binary
  160. Using /lib/modules/atifplib.o
  161. Using /lib/modules/atyx220.o
  162. Mon Jul 11 00:00:00 UTC 2005
  163. Password: jffs2_get_inode_nodes(): CRC failed on node at 0x007bcfd0: Read 0xffffffff, calculated 0bEXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
  164. Diagnostics program found; verifying...
  165. Running diagnostics...
  166.  
  167. Installing software version 2.7.15-HACK.
  168.  
  169. USDTV-MediaWorks Software
  170. Copyright 2001-2005 U.S. Digital Television, Inc.  All Rights Reserved.
  171.  
  172.  
  173. ATI Xilleon X225-A13    (Device ID: 4855   Revision: 3)
  174.  
  175. Aper  PhysBase  Size      VirtBase  AperBase  Access
  176. 00    18000000  00010000  2aacb000  2aacb000  MM
  177. 01    08000000  08000000  2ad70000  2ad70000  MM
  178. 02    1c000000  04000000  32d70000  32d70000  MM
  179. 03
  180.   10008000  0000 **** buffer 0xb00
  181. 1000  2aae3000  2aae3000  MM
  182. 07    10009000  00000100  2aae4000  2aae4000  MM
  183. 08    10009100  00000100  2aae5000  2aae5100  MM
  184. 10    00002100  00000008  00002100  00002100  IO
  185. 11    00002108  00000004  00002108  00002108  IO
  186. 12    00002120  00000010  00002120  00002120  IO
  187. 21    1a000000  02000000  36d70000  36d70000  MM
  188. 22    10000000  00008000  2aadb000  2aadb000  MM
  189.  
  190.  
  191. XCLK = 165 MHz
  192. MCLK = 99 MHz
  193. MIPS = 264 MHz
  194.  
  195. Memory Configuration: 32-bit 2-Channel DDR.
  196. Channel 0 Size: 02000000 (32 MB)
  197. Channel 1 Size: 02000000 (32 MB)
  198. Total mem Size: 04000000 (64 MB)
  199.  
  200. Detecting theater...
  201. Error: Rage theater/theater2 not found on VIP bus.
  202. PMON memory size is 00000c00 (3KB)
  203. OS memory start at  00100000 (1MB)
  204. OS memory size is   01f00000 (31MB)
  205.  
  206. Core Version: 16.3.3.4
  207. LLD Version:  16.3.3.4
  208. HKD Version:  16.3.3.4
  209.  
  210. Core initialization completed.
  211.  
  212. MMDC client "mmfpanel_usdtv" connected
  213.  
  214. ATI Xilleon X225-A13    (Device ID: 4855   Revision: 3)
  215.  
  216. Aper  PhysBase  Size      VirtBase  AperBase  Access
  217. 00    18000000  00010000  2aacd000  2aacd000  MM
  218. 01    08000000  08000000  2b236000  2b236000  MM
  219. 03    10008000  00001000  2aae5000  2aae5000  MM
  220. 07    10009000  00000100  2aae6000  2aae6000  MM
  221. 08    10009100  00000100  2aae7000  2aae7100  MM
  222. 10    00002100  00000008  00002100  00002100  IO
  223. 11    00002108  00000004  00002108  00002108  IO
  224. 12    00002120  00000010  00002120  00002120  IO
  225. 22    10000000  00008000  2aadd000  2aadd000  MM
  226.  
  227.  
  228. XCLK = 165 MHz
  229. MCLK = 99 MHz
  230. MIPS = 264 MHz
  231.  
  232. Memory Configuration: 32-bit 2-Channel DDR.
  233. Channel 0 Size: 02000000 (32 MB)
  234. Channel 1 Size: 02000000 (32 MB)
  235. Total mem Size: 04000000 (64 MB)
  236.  
  237. Detecting theater...
  238. Error: Rage theater/theater2 not found on VIP bus.
  239.  
  240. Core Version: 16.3.3.4
  241. LLD Version:  16.3.3.4
  242. HKD Version:  16.3.3.4
  243.  
  244. Core initialization completed.
  245.  
  246. MMDC client "mmprogress" connected
  247. acl| FwIrqRetrievalThread (Queue entry 0x332e4958) started, Synchronization Mutex released
  248. acl| AtiCore_NotificationMsgActivate(1, ATI_MSG_TYPE_INTERRUPT_OCCURRED) returns 0x0
  249. acl| FwIrq_QueueCreate: Thread Synchronization Mutex 10 passed
  250. acl| FwHkdCommunicationThread started, Synchronization Semaphore released
  251. acl| AtiCore_NotificationMsgActivate(ATI_MSG_TYPE_FROM_HKD) returns 0x0
  252. acl| FwHkdInit: Thread Synchronization Semaphore 12 passed
  253. acl| Creating Message Event 0x1 for HKD Message Tag 0x1
  254. acl| Waiting for the Message Event 0x1
  255. acl| HkdCommunicationThread: AtiCore_NotificationMsgWait() returns a message 2 of length 8
  256. acl| FwHkdCommunicationThread: FROM_HKD Message 0x88086421 (Tag = 0x1) received
  257. acl| Signalling the Message Event 0x1
  258. acl| Message Event 0x1 is received with coreResult = 0x0
  259. acl| Deleting Message Event 0x1
  260. acl| FwHkdInit() success
  261. acl| Creating Message Event 0x1 for HKD Message Tag 0x2
  262. acl| Waiting for the Message Event 0x1
  263. acl| HkdCommunicationThread: AtiCore_NotificationMsgWait() returns a message 2 of length 12
  264. acl| FwHkdCommunicationThread: FROM_HKD Message 0x90086662 (Tag = 0x2) received
  265. acl| Signalling the Message Event 0x1
  266. acl| Message Event 0x1 is received with coreResult = 0x0
  267. acl| Deleting Message Event 0x1
  268. acl| FwHkdGetTimestampingTimer() get Timer to be used 0x2970:0x296c
  269. VidMem: ACLGfx Comm Offset = 0xc00 size = 0x2080
  270. MMDC client "mmsay" connected
  271. MMDC client "mmsay" connected
  272. MMDC client "mmsay" connected
  273.  
  274. *************************************************
  275. *  Now writing file system to /dev/mtd4.  *
  276. *************************************************
  277.  
  278. MMDC client "mmsay" connected
  279. Erasing 16 Kibyte @ cfc000 -- 99 % complete. Cleanmarker written at cfc000.
  280. MMDC client "mmsay" connected
  281. MMDC client "mmsay" connected
  282. MMDC client "mmsay" connected
  283. MMDC client "mmsay" connected
  284. MMDC client "mmsay" connected
  285. MMDC client "mmsay" connected
  286.  
  287. Hack your own - it's more fun...
  288.  
  289.  
  290. BusyBox v0.60.0 (2002.02.05-18:03+0000) Built-in shell (msh)
  291. Enter 'help' for a list of built-in commands.
  292.  
  293. # Password:
  294. #
  295. # ls
  296. bin
  297. dev
  298. etc
  299. lib
  300. mnt
  301. opt
  302. proc
  303. sbin
  304. tmp
  305. usr
  306. var
  307. # Password: xyzzy
  308. xyzzy: not found
  309. # Password: xyzzy
  310. xyzzy: not found
  311. # Password:
  312. #
  313. # ls
  314. bin
  315. dev
  316. etc
  317. lib
  318. mnt
  319. opt
  320. proc
  321. sbin
  322. tmp
  323. usr
  324. var
  325. # s -la
  326. s: not found
  327. # ls -la
  328. drwxr-xr-x   14 0        0               0 Jan  1  1970 .
  329. drwxr-xr-x   14 0        0               0 Jan  1  1970 ..
  330. drwxr-xr-x    2 0        0               0 Feb  3  2006 bin
  331. drwxr-xr-x    2 0        0               0 Oct 18  2003 dev
  332. drwxr-xr-x    3 0        0               0 Feb  3  2006 etc
  333. drwxr-xr-x    3 0        0               0 Feb  3  2006 lib
  334. drwxr-xr-x    4 0        0               0 Oct 14  2003 mnt
  335. drwxr-xr-x    3 0        0               0 Feb  3  2006 opt
  336. dr-xr-xr-x   32 0        0               0 Jan  1  2003 proc
  337. drwxr-xr-x    2 0        0               0 Feb  3  2006 sbin
  338. drwxr-xr-x    2 0        0               0 Jul 11 00:00 tmp
  339. drwxr-xr-x    5 0        0               0 Aug 19  2003 usr
  340. drwxr-xr-x    3 0        0               0 Aug 19  2003 var
  341. #

advertising

Update the Post

Either update this post and resubmit it with changes, or make a new post.

You may also comment on this post.

update paste below
details of the post (optional)

Note: Only the paste content is required, though the following information can be useful to others.

Save name / title?

(space separated, optional)



Please note that information posted here will expire by default in one month. If you do not want it to expire, please set the expiry time above. If it is set to expire, web search engines will not be allowed to index it prior to it expiring. Items that are not marked to expire will be indexable by search engines. Be careful with your passwords. All illegal activities will be reported and any information will be handed over to the authorities, so be good.

comments on this paste

XhDmhZUwlMN

Posted By: Fegner (bMNdMcOpW)

Posted: March 30th, 2012 at 4:30am MDT

I am very impressed with the atircle I have just read. I wish the writer of melaniebremner.com can continue to provide so much useful information and unforgettable experience to melaniebremner.com readers. There is not much to say except the following universal truth: The probability you will irrepairably stick your foot in your mouth is directly proportional to the attractiveness of the person you are trying to impress. I will be back.